|
|
 |
|
|||
 |
||||
 |
||||
|
__________ Juniper MultilinkPPP (MLPPP) configuration. __________ Juniper Serial configuration. __________ Juniper E1 Configuration. __________ ISP setup. __________ Juniper and Cisco E1 cross cable connectivity. __________ Juniper Serial Bundling configuration. __________ Juniper and Cisco Serial Back 2 Back Connectivity. __________ __________ Juniper NAT Setup __________ Juniper Security Devices. __________ SSG 20 Configuration. __________ NetScreen 5GT configuration. __________
|
All configuration are working fine in live/ LAB environments
Juniper J4300 and Cisco 1721 Serial back to back connectivity
Page: 1 , 2 , 3 , 4 , 5 , 6 , 7
In this guide we try to configure back to back/ DCE to DTE V.35 connectivity of Juniper J4300 router with Cisco 1721 router. PAGE 1
Hardware Details: » Cisco Router 1721 » Smart Serial Cables V.35 Interface. » J4300 (Juniper Router) » Serial Cable for J4300.
First
we configure Cisco 1721 Router for DTE cable connectivity. Login
IN Cisco router, type below mention commands to configure you 1721
router Serial 1 as a DTE. C1721#
configure terminal <┘ C1721#
interface serial 1 <┘ C1721#
ip address 10.16.11.2 255.255.255.0 <┘ C1721#
encapsulation hdlc <┘ Now
we configure Juniper J4300 Router for DCE cable connectivity. The
default IP of J4300 is 192.168.1.1, open your browser window and type,
Continue to next page .............
Page: 1 , 2 , 3 , 4 , 5 , 6 , 7
|
|
||
|
|
||||
