|
|
 |
|
|||||
 |
||||||
 |
||||||
|
__________ Cisco MultilinkPPP (MLPPP) configuration. __________ Cisco Serial Back-to-Back Connectivity. __________ __________ __________ Cisco and Juniper E1 cross cable connectivity. __________ Cisco Serial Bundling configuration. __________ Cisco and Juniper Serial Back 2 Back Connectivity. __________
|
All configuration are working fine in live/ LAB environments
Cisco 1721 Modular Access Router E1 configuration
Configuring
Cisco 1721 Modular Access Router specification:
Hardware Details: » Cisco 1721 Modular Access Router. » E1 card (one port, VWIC 1MFT –G703) Configuration: Configuration
of E1 controller: RouterA# configure terminal RouterA(config-controller)#controller E1 0 RouterA(config-controller)# framing no-crc4 RouterA(config-controller)# clock source internal RouterA(config-controller)# channel-group 0 timeslot 1-31 speed 64 RouterA(config-controller)# exit Configuration
of Serial interface: RouterA(config)# interface serial 0/0 RouterA(config-if)# encapsulation ppp RouterA(config-if)# ip address 172.10.10.1 255.255.255.0 RouterA(config-if)# exit
-------------Configuration Complete-------------
|
|
||||
|
|
||||||
